People don’t usually agree on what to do about climate change and the fossil fuel energy crisis, but everyone agrees that they want to save money on energy and waste less. There are a lot of ways to conserve energy and money on your bills. It is possible to create a home that is energy-efficient and productive. According to MoneyPug, a site used to find a mortgage advisor, you are not destined to use energy the way your house was designed. There are many ways to do this, read ahead for a checklist that will help you design a home that is efficient in its use of energy.

Heating & Cooling

One of the best places to start saving money in your home is to make sure that your heating and cooling system is working correctly and efficiently. The temperature of your heater can affect your home’s energy consumption. A one degree can change that can affect your energy bill by up to 10 percent. A timer can reduce the overall time your heater is running.

You could be reducing your energy consumption, which means less on your bills. The heater’s filter and ducts can affect its performance and the energy consumed to run it. The settings of your air conditioner leading by air conditioning and system manufacturers. You can reduce your cooling by can affect your energy consumption by up to 10 percent. Finally, managing airflow by shutting windows and doors reduces the air that escapes, but you should make sure that your insulation is good.

Insulation

Did you know that 40 percent of your home energy use is for space heating? Insulation is very important to keeping heat in. What your house is made out of can really affect the home’s insulation. Concrete blocks, hollow polystyrene blocks, rendered extruded polystyrene sheets, and straw bales are modern building materials that will keep the hot and cool air in.

Roof insulation is installed under the roofing itself and above the ceiling, which reduces the heat gain from the material. You should consider installing or topping up insulation to the correct thickness in the ceiling to help you reduce the heat transfer. If you install wall cavities around stud frames and within walls that are solid, you can help save up to 20 percent of the energy normally used for healing and cooling. Finally, floor insulation can help retain warmth in cooler climates.

Furthermore, you want to make sure that your windows and doors are properly draught-proofed and sealed. A lot of heat and cool air can leave through the cracks. If you make sure that your doors and windows are tight, you will keep the temperature in. Even your windows, frames, drapes, and blinds in mind. The glass on your windows can be glazed, which really helps. The color of your blinds should reflect heat in the summer and bring it in during the winter. Curtains and drapes should be thick in the colder months and thinner in the summer.

Water

One of the other energy uses that you need to pay attention to is your water system. Not only do you need to see that your water heater is working effectively and efficiently, you should make sure that your thermostat settings are correct. Your showerhead can also save water while maintaining an adequate level of water pressure. Hot water pipes should be insulated. Investing in your hot water systems will save a lot of money and consumer less energy. It will even release less greenhouse gases. Even the position of your water system matters. Heat can be wasted when it travels through long pipes. The one-off cost of moving your system could save on water usage and energy in the long-run.

Appliances

Making sure that your appliances are working correctly is also necessary. Your fridge should seal tightly. The dishwasher can be set to air dry so that you save energy. Your freezer should be cleared of ice, because if there is ice it will worker to keep everything frozen. In addition, switching off the microwave will help you save energy. Turning appliances off instead of putting them on standby mode can help you save a lot of power and money.

There are so many ways to augment your home and make it more energy-efficient. It doesn’t have to be that the way the house was designed dictates all of your energy use. You can change the things inside your home to make it more effective and efficient.